Pilz PIT m3.1p User Manual download pdf (Page 17)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

4-3

4.1 Key ID number of the actuator

4 Function description

4.1Key ID number of the actuator4100Key ID number of the actuator4-Key_ID_Nummer

Once an actuator has been connected, the actuator's unique Key ID

number is downloaded to the higher-level process controller using a de-

fined protocol.

The Key ID number is used to clearly identify the actuator and is unique.

It is printed on the actuator's type label as a 9-digit decimal figure.

The Key ID number consists of two parts:

 Bit 27 … 24 is the Key Mode

 Bit 23 … 0 is the consecutive number.

Example:

INFORMATION

Please note that the Key ID number is not printed on the actua-

tor packaging.

If the actuator is lost, it is impossible to supply a replacement

actuator with an identical Key ID number.

Bit 7 ... Bit 0

Bit 15 ... Bit 8

Bit 23 ... Bit 16

Bit 27 ... Bit 24

Key Mode

Bit 27

Bit 26

Bit 25

Bit 24

Service

consecutive number

Key-ID-Nummer: 130000044

1101

Key-ID-Nummer: 020000510

11111110

00000001

00000000

0010

00101100

00000000

(Key Mode Service)

(Key Mode 02)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

No comments

Pilz PIT m3.1p User Manual Page 17